Jtag and chip off tools and equipment

The following list contains equipment used for performing JTAG and chip-off analysis. It is noted when equipment is used for both procedures in order to avoid overlap and duplication of equipment. The URL's provided are for reference and other vendors and suppliers exist for said equipment. Please search Internet for other competitive vendors.

Note: This equipment is not a definitive list and substitutions can be made for equivalent tools and equipment.

JTAG and Chip-Off Equipment List

  • iSeasamo Phone Opening Tool
  • Carton SPZT-50PG Microscope (optional: w/trinocular)
  • Xytronic 988D Solder Rework Station
  • Weller WES51 Solder Station
  • Xytronic LF-852D Hot Air Station
  • Amprobe 35XP Multimeter
  • Magnifying Desk Lamp
  • Circuit board holder
  • Chip Epoxy Glue Remover
  • 0.040 gauge transformer winding wire
  • Kester 44 rosin flux solder
  • Xcelite Hobby Knives
  • Terra Dexterity PVC foam gloves
  • Richard 13321 blades
  • HAKKO Omnivise C1390C Handle
  • eMMC SCP-6 Platform
  • BGA PMTC Sn63pb37 balls 0,35mm 12500 pcs
  • BGA PMTC Sn63pb37 balls 0,30mm 12500 pcs
  • Stencil Direct BGA for eMMC 153/169
  • Stencil Direct BGA for eMMC 162/186
  • Stencil Direct BGA for eMMC/eMCP 221
  • Stencil Direct BGA for eMMC 529
  • BGA stencil for Samsung S7 (SM-G930F)
  • BGA stencil for Samsung S6 Edge (SM-G925F)
  • BGA stencil for Samsung S6 (SM-G920F)
  • BGA stencil for Samsung Galaxy S5 (SM-G900F)
  • BGA stencil for Samsung Galaxy S4 (i9505)
  • BGA stencil for Samsung Galaxy S4 (i9500)
  • Ultra thin jumper wire/Copper spool wire 0.02mm/50m
  • Desoldering Tape 80-2-5 Chemtronics Solder-Wick 1.5mm / 1.5m
  • Isopropanol with sprayer 99.9% capacity of 150ml
  • Anti-static mat PROSKIT 8BM-405A 60x120 cm
  • Silicone service mat MAT-001 25x35cm
  • 13in1 spatula for removing and work with BGAs (Jabe)
  • Precision scalpel/ penknife with 10 removable blades
  • Precision tweezer straight and narrow Rhino RH-11
  • Ceramic Tweezers / Tweezers VETUS - T2
  • Solder Fume Extractor ZD-153
  • Quick 6101 Fume Extractor
  • Air Ionizer Dr. Schneider SL-001
  • 8" x 8" x 3/8" steel plate

JTAG Specific Equipment List

  • RIFF Box
  • RIFF Box 2 (JTAG and EMMC)
  • Octoplus Box
  • Octoplus JTAG Box (JTAG)
  • Z3X Easy-Jtag Box
  • Easy JTAG Z3X Box (JTAG and EMMC)
  • GPGEMMC Box
  • GPG JTAG Box (JTAG PRO)
  • ATF (Advance Turbo Flasher)
  • ATF GOLD (Advance Turbo Flasher for JTAG, EMMC, SPI)
  • GPGJTAG Box (Jtag Pro)
  • ORT Box
  • ORT JTAG Pro with EMMC Booster (JTAG and EMMC)
  • Medusa Pro Box (JTAG and EMMC)
  • Medusa Box
  • UFI BOX (JTAG, EMMC, SPI)
  • Programmer UFS / eMMC / eMCP NuProg-E

Add-On Tools / Adapters For JTAG Specific Equipment List

  • E-Mate E-Socket 5-in-1 High Speed EMMC Programmer for ATF - Z3x-Pro - GPGEMMC
  • E-Mate Pro eMMC Tool MoorC v2
  • BGA Adapter 162 For GPGEMMC Box
  • BGA Adapter 169E For GPGEMMC Box
  • BGA221 Adapter Socket For E-Mate Box - Riff Box - GPGEMMC Box
  • MOORC JTAG-ISP Adapter 5-in-1 For ATF, Riff, Medusa etc.
  • ATF EMMC Test Point Finder
  • Universal JTAG/eMMC/FBUS JE-02 adapter
  • Set of Universal JTAG adapters VF-JIG for VR-Table - 11R
  • Adapter eMMC/JTAG for Riff BOX 2 - RC2000
  • JTAG Finder
  • EMMC Z3X Jtag Pro 3 in 1 Adapter
  • Universal JTAG Interface
  • Universal Jtag Cable With Labeled Wires
  • SD-EMMC Plus Adapter - Model SE-P1
  • Frames / Limiters adapters for BGA (spacer)
  • Probe Cable For Riff Box
  • Powered Mini USB - Micro USB Cable For Repair and Jtag
  • Fonefunshop Test Point Box
  • JTAG AMOI adapters
  • JTAG DELL adapters
  • JTAG BenQ-Siemens adapters
  • JTAG Toshiba adapters
  • JTAG HTC adapters
  • JTAG Huawei adapters
  • JTAG LG adapters
  • JTAG Motorola adapters
  • JTAG Nokia adapters
  • JTAG Panasonic adapters
  • JTAG Sagem adapters
  • JTAG Samsung adapters
  • JTAG Sendo adapters
  • JTAG Sony adapters
  • JTAG SonyEricsson adapters
  • JTAG ZTE adapters

eMMC ISP Specific Equipment List

  • VR-TABLE Forensic Tool for JTAG/EMMC/FBUS Tool
  • Inspection camera for VR-Table - VGA 2Mpx with holder
  • Universal eMMC PullUp PU cable for ISP eMMC to VR-Table
  • Set of 10 high-precision probes with movable pins VR-064 1mm / 69mm to VR-Table | | |
  • Set of 10 ultra high-precision probes VR-070m 0,50mm/73mm to R-Table
  • Set of 10 standard probes VR-070 1mm/73mm to VR-Table
  • Adapter EMMC for Riff BOX - RC1000
  • Adapter EMMC/JTAG ATF v2 5in1 GPG
  • EMMC adapter for Easy Z3x JTAG Box

Chip-Off Specific Equipment List

  • Wagner HT1000 Heat Gun
  • Heat Gun stand
  • UP-828 Programmer
  • UP-828 Adapter VBGA529
  • UP-828 Adapter BGA110
  • UP-828 Adapter BGA88 - U08881
  • UP-828 Adapter FBGA167
  • UP-828 Adapter FBGA63 U08631
  • UP-828 Adapter SBGA152
  • UP-828 Adapter SBGA199
  • UP-828 Adapter U11371 FBGA137
  • UP-828 Adapter VBGA169E
  • UP-828 Adapter VBGA221 - U05221
  • UP-828 Adapter VBGA40
  • UP-828 Adapter VBGA133
  • Sireda eMMC Burn-In Socket (size 11 x 10mm)
  • Sireda eMMC Burn-In Socket (size 11.5 x 13mm)
  • Sireda eMMC Burn-In Socket (size 12 x 16mm)
  • Sireda eMMC Burn-In Socket (size 12 x 18mm)
  • Sireda eMMC Burn-In Socket (size 14 x 18mm)

Notes

1. The UP-828 driver is not signed and therefore doesn't work by default in Windows 7 64-bit. The programmer is identified as a as a Cypess Semiconductor Corp. CY7C68013. The signed Windows 7 64-bit driver can be installed by downloading and installing the Cypress EZ-USB FX2LP Development Kit, then using the CyUSB.sys driver found in '\CY3684_EZ-USB_FX2LP_DVK\1.0\Drivers\cyusbfx1_fx2lp' for the UP-828 programmer.